SPRING SAVINGS 10% off your glazing bars when you buy your polycarbonate from us! Use BAR10 at checkout.

PVC Capped Rafter Bar 10mm, 16mm & 25mm – Anthracite Grey

£0.00 £0.00

Grey PVC Capped Rafter Bar which is a strong, lightweight, rafter supported bar from the Capex range. Available in an Anthracite Grey finish (RAL 7016) in a variety of sizes. With a screw down aluminium base and a snap down PVC top cap it is easy to fit and ideal for most applications. The bar comes complete with EPDM gaskets for a leak proof seal.

This snap down glazing bar is suitable for 10mm, 16mm and 25mm polycarbonate with dedicated locking points in the base for each sheet thickness. Each bar comes complete with one end cap however, additional grey end caps can be bought seperately if you cutting the bars down. For additional end caps please see below.

July Savings! Buy your polycarbonate from us and enjoy a 10% discount off these glazing bars throughout July - apply the code BAR10 to your basket.

These bars are not suitable for glass. For rafter bars which are suitable for glass please see our 50mm or 60mm antracite grey aluminium capped screw down bars.

Please choose your bar lengths from the options below:

Availability: In stock
SKU
ND25STGAG

Uses

These snap down PVC capped Glazing bars are suitable for use with multi--wall polycarbonate sheets in 10mm, 16mm and 25mm thicknesses. Ideal for canopies and carports, and for 16mm & 25mm polycarbonate conservatory roofs, these versatile bars are a very cost effective solution.

Please note that if you are using glass for your project, this bar is not suitable. However, you can use our aluminium capped rafter bars which are designed for this.

Options

These Exitex Capex rafter bars are available in Antracite Grey with a wide range of lengths to choose from.

Fitting

The bars are very easy to fit. To install, simply screw the aluminium base bar directly down to your rafter. This base bar contains two gaskets which your glazing then sits on top of at either side. The PVC top cap comes complete with co-extruded gaskets and is then ’snapped down’ into position to give your roof a watertight seal. Each bar comes complete with an end cap (the 6m bar comes with two.) You can order extra end caps if you are planning to cut down your bars.